ATEX Ethernet Wireless Access Point & Bridge 

Intrinsically Safe Ethernet Wireless Access Point & Bridge

II 1GD Ga Ex ia IIC T4

The Zone 1 Intrinsically Safe Ethernet Wireless Access Point/Bridge 9469-ET is a multi-functional module that can be used as an Access Point, Wireless Bridge (Client) or Wireless Repeater.

When used in the Access Point (AP) mode, it allows wireless devices to connect through it and onto the wired Ethernet network, either in AD-HOC or Infrastructure modes.

When used as a Bridge, it makes it possible to turn any 10/100 Ethernet device into a wireless device, or to connect two network segments together to make a single network (without the interconnecting wire or fibre optic).

Additionally the module may also be used in its Wireless Repeater (WDS) mode to extend the range covered by a wireless network.

**Requires Zone 1 Intrinsically Safe Ethernet Wireless Access Point/Bridge 9469-ET Isolator and 9491-PS IS Power Supply
The intrinsically safe hazardous area certification permits the components to be mounted in a Zone 1, or Division 1 hazardous area with connectivity into Zone 0 and the associated apparatus certification of the 9468-ET IS Ethernet isolator and 9491-PS IS power supply allow this equipment to be mounted in a Zone 2 hazardous area and connected to intrinsically safe equipment in a Zone 0 or 1, or Division 1 hazardous area.

• II 1GD Ga Ex ia IIC T4 Ex iaD 20 T135°C

• I M1 Ma Ex ia I

• -20°C to +60°C

• IP20

Downloads

 Product Datasheet

 Product Manual

 Gallery

*Prices as shown on this store are indicational and subject to 21% tax, currency changes and shipping costs. For an accurate and special price please call or e-mail our support